![Fagor 8065 Error Solving Manual Download Page 136](http://html1.mh-extra.com/html/fagor/8065/8065_error-solving-manual_3194234136.webp)
Error solving manual.
CNC 8060
CNC 8065
·136·
(R
EF
: 1709)
3719
'RESET to park spindles in motion or G33/G63/G95/G96/#CAX/#SYNC'
DETECTION
When parking an axis from the PLC.
CAUSE
The PLC tries to part a spindle that is moving, synchronized, activated as C axis or
while some of the functions G33, G63, G95 or G96 is active.
SOLUTION
The PLC cannot part the spindle in this situation. Press reset to stop the movement,
the synchronization, deactivate the C axis or deactivate functions G33, G63, G95 or
G96.
3720
'Probe not available. Busy in another process'
DETECTION
During execution.
CAUSE
The CNC has tried to execute a probing action, but the probe is being used by a
previous process (G100 or TOUCHPROBE command).
SOLUTION
Wait until a probing action is completed before executing the next one.
3723
'G174 not possible for an axis in DRO mode'
DETECTION
During execution.
CAUSE
The CNC has detected function G174 for an axis that is in DRO mode (DRO mark).
SOLUTION
Check the program. In order to force the machine coordinate of an axis (G174), the
axis must not be in DRO mode, deactivate its DRO(axis) mark and activate its
SERVO(axis)ON mark.
3724
'G174 is not possible if the axis is not in position'
DETECTION
During execution.
CAUSE
The CNC has detected function G174 for an axis that is not in position.
SOLUTION
Check the program. In order to force the machine coordinate of an axis (G174), it must
be in position; i.e. not moving and the PLC mark INPOS(axis) must be active.
3725
'G174 not possible for an axis that is synchronized'
DETECTION
During execution.
CAUSE
The CNC has detected function G174 for an axis that is synchronized.
SOLUTION
Check the program. To force the coordinate of an axis (G174), the axis must not be
synchronized with another one. Desynchronize the axis or check, in the PLC program,
the logic of the INSYNC mark of the axis.
3726
'The Drive Status Ready of the slave axis of the tandem is missing'
DETECTION
When starting the movement of a tandem axis.
CAUSE
The CNC has tried to move the master axis of the tandem without waiting for the slave
axis to be enabled.
SOLUTION
In the PLC program, allow movement only if both tandem axes are enabled.
3727
'A multiple axis cannot be deactivated without getting in position'
DETECTION
When deactivating the SWITCH mark of the axis.
CAUSE
The CNC has tried to deactivate an axis of a multiple group before the axis reached
position; i.e. while there is a movement pending.
SOLUTION
In the PLC program, condition the deactivation of the axis to being in position; i.e. if
it is not moving.
3728
'Multiple axis with a command in execution at the drive , SWITCH not allowed'
DETECTION
When deactivating the SWITCH mark of the axis.
CAUSE
The CNC has tried to deactivate an axis of a multiple group before completing a
Sercos command to park, unpark, change gears or change sets.
SOLUTION
In the PLC program, allow deactivating the axis only if the parking, unparking, gear
change or set change has finished.
3729
'There cannot be more than one axis of the multiple group active'
DETECTION
When activating the SWITCH mark of the axis.
CAUSE
The CNC has tried to activate an axis of a multiple group, before deactivating the
previous axis.
SOLUTION
In the PLC program, first deactivate the last active axis and then activate the new axis.
Summary of Contents for 8065
