Error solving manual.
CNC 8060
CNC 8065
·34·
(R
EF
: 1709)
1187
'#AXIS: repeated axis name'
DETECTION
During execution.
CAUSE
The same axis has been programmed more than once in the instruction.
SOLUTION
Check the program.
1188
'"["not expected'
DETECTION
During execution.
CAUSE
Syntax error in the instruction.
SOLUTION
Check the program.
1189
'#MPG: too many parameters'
DETECTION
During execution.
CAUSE
The instruction has too many parameters.
SOLUTION
The #MPG instruction admits a maximum of three parameters. Each one of them
represents the distance moved per handwheel pulse in each position of the switch.
1190
'#MPG: Negative or zero handwheel resolutions are not allowed'
DETECTION
During execution.
CAUSE
The #MPG instruction tries to define a negative or zero handwheel resolution.
SOLUTION
The movement distance per handwheel pulse must be positive and other than zero.
1191
'#INCJOG: Negative or zero incremental jog distances are not allowed'
DETECTION
During execution.
CAUSE
The #INCJOG instruction tries to define a negative or zero distance.
SOLUTION
The value of the incremental movement of the axis in each position of the switch must
be a positive value and other than zero.
1192
'#INCJOG: Negative or zero incremental jog feedrates are not allowed'
DETECTION
During execution.
CAUSE
The #INCJOG instruction tries to define a negative or zero feedrate.
SOLUTION
The feedrate of the axis in each position of the switch must be a positive value and
other than zero.
1193
'#CONTJOG/#INCJOG: programmed feedrate out of range'
DETECTION
During execution.
CAUSE
The programmed feedrate is too high.
SOLUTION
Check the program.
1194
'#INCJOG: too many parameters'
DETECTION
During execution.
CAUSE
The instruction has too many parameters.
SOLUTION
The #INCJOG instruction admits a maximum of five groups of parameters. Each of
them represents the axis feedrate and movement for each position of the switch in
incremental jog.
1195
'#CONTJOG: too many parameters'
DETECTION
During execution.
CAUSE
The instruction has too many parameters.
SOLUTION
The #CONTJOG instruction only admits one parameter that represents the axis
feedrate when the switch is in continuous jog.
1196
'#CONTJOG: Negative or zero continuous jog feedrates are not allowed'
DETECTION
During execution.
CAUSE
The #CONTJOG instruction tries to define a negative or zero feedrate.
SOLUTION
The value of the axis feedrate must be a positive value and other than zero.
1197
'#SET OFFSET: positive lower offset'
DETECTION
During execution.
CAUSE
The lower axis travel limit for jogging has a positive value.
SOLUTION
The lower axis travel limit for jogging must be negative or zero.
Summary of Contents for 8065
