Error solving manual.
CNC 8060
CNC 8065
·69·
(R
EF
: 1709)
1595
'A spindle cannot be master and slave of a synchronization at the same time'
DETECTION
During execution.
CAUSE
The slave spindle of a synchronization is the master spindle of another one.
SOLUTION
Check the program.
1596
'The spindle is not synchronized'
DETECTION
During execution.
CAUSE
The CNC has tried to desynchronize a slave spindle that is not currently
synchronized.
SOLUTION
Check the program.
1597
'A slave spindle cannot be synchronized with two masters'
DETECTION
During execution.
CAUSE
A slave spindle cannot be synchronized with two masters at the same time.
SOLUTION
Decide which of the two synchronizations you wish to activate.
1598
'A slave spindle cannot be programmed during synchronization'
DETECTION
During execution.
CAUSE
An S speed or an M function has been programmed for the slave axis of a
synchronization.
SOLUTION
Delete those data from the program or desynchronize the spindle.
1599
'Gear change is not possible on synchronized spindles'
DETECTION
During execution.
CAUSE
While synchronizing two spindles, the CNC does not allow a gear change in any of
them.
SOLUTION
Cancel the synchronization to change the spindle gear.
1600
'A synchronized spindle cannot work as C axis or in G63'
DETECTION
During execution.
CAUSE
The CNC has tried to synchronize a spindle that is either working as C axis or has
function G63 active. The CNC has tried to activate the spindle as C axis or function
G63, but the spindle is synchronized.
SOLUTION
Cancel the C axis or function G63 to synchronize the spindles. To work with the C
axis or with function G63, cancel the spindle synchronization.
1601
'A synchronized spindle cannot be released (freed)'
DETECTION
During execution.
CAUSE
Instructions #SET SP and #FREE SP cannot eliminate a spindle if it is synchronized.
SOLUTION
Cancel the synchronization to eliminate the spindle from the configuration.
1602
'To park a spindle, it must be stopped (M5)'
DETECTION
During execution.
CAUSE
The CNC has tried to park a spindle that is not stopped.
SOLUTION
Stop the spindle before parking it.
1603
'FOLLOW OFF: Program slave axis'
DETECTION
During execution.
CAUSE
The programmed axis is not slave in any synchronization.
SOLUTION
Check the program.
1604
'G31 requires G02/G03 active'
DETECTION
During execution.
CAUSE
Function G31 can only be programmed if a circular interpolation is active.
SOLUTION
Program G02/G03 in the G31 block.
1605
'G31 requires programming the polar angle and its interpolation center'
DETECTION
During execution.
CAUSE
The Polar angle or some coordinate of the center is missing in function G31.
SOLUTION
Check the program.
Summary of Contents for 8065
