Error solving manual.
CNC 8060
CNC 8065
·156·
(R
EF
: 1709)
6011
'CANopen node report: Undetermined emergency.’
'CANopen node report: Generic emergency.'
'CANopen node report: Current emergency.'
'CANopen node report: Over-current at the outputs.'
'CANopen node report: Voltage emergency.'
'CANopen node report: Supply voltage missing.'
'CANopen node report: Temperature emergency.'
'CANopen node report: Hardware emergency.'
'CANopen node report: PT100 input broken or disconnected.'
'CANopen node report: Voltage missing at the outputs.'
'CANopen node report: Software emergency.'
'CANopen node report: Error in internal code.'
'CANopen node report: Emergency at additional modules.'
'CANopen node report: Communication emergency.'
'CANopen node report: Period too long between synchronisms.'
'CANopen node report: Overrun, lost message.'
'CANopen node report: Bus errors, passive bus.'
'CANopen node report: Presence control failure.'
'CANopen node report: Bus-off recovery.'
'CANopen node report: Protocol error.'
'CANopen node report: PDO too short.'
'CANopen node report: PDO too long.'
'CANopen node report: External emergency.'
'CANopen node report: OEM specific emergency.'
DETECTION
During execution.
CAUSE
This error indicates that a CANopen node has sent an emergency message. The error
text depends on the specific code of the emergency being sent (value 3).
VALUE 1
Node number.
VALUE 2
Error codes for the CANopen bus (bit-based codes).
VALUE 3
Emergency table for the CANopen bus (bit-based codes).
Code.
Meaning.
0x01
Generic error.
0x02
Current error.
0x04
Voltage error.
0x08
Temperature error.
0x10
Communication error.
0x20
Device error.
0x40
Reserved.
0x80
OEM specific error.
Emergency.
Meaning.
0x0000
Corrected error.
0x1000
Generic error.
0x2000
Current.
0x2100
Current, device input side.
0x2200
Current inside the device.
0x2300
Current, device output side.
0x2310
Over-current at the outputs.
0x3000
Voltage.
0x3100
Mains voltage.
0x3200
Voltage inside the device.
0x3300
Output voltage.
0x4000
Temperature.
0x4100
Room (ambient) temperature.
0x4200
Temperature inside the device.
0x5000
Hardware of the device.
Summary of Contents for 8065
