Fagor 8065, Error Solving Manual

Page: 88 / 220

Error solving manual.
CNC 8060
CNC 8065
·88·
(R
EF
: 1709)
1807 'G87: Tool diameter = 0'
DETECTION During the execution of the cycle.
CAUSE The tool diameter is 0.
SOLUTION Correct the value of the tool radius in the tool table or select another tool.
1808 'G87: Tool missing'
DETECTION During the execution of the cycle.
CAUSE Tool missing at the spindle.
SOLUTION Program a tool before the cycle or load a tool at the spindle.
1809 'G87: tool diameter smaller than C'
DETECTION During the execution of the cycle.
CAUSE The tool diameter is smaller than the milling pass (parameter C).
SOLUTION Reduce the milling pass or use a tool with a larger diameter.
1810 'G88: Depth = 0'
DETECTION During the execution of the cycle.
CAUSE The resulting depth of the pocket is zero. The programmed depth (parameter I) is the
same as the sum of parameters Z and D; if parameter Z has not been programmed,
the programmed depth (parameter I) is the same as parameter D.
SOLUTION Correct the programming of parameters I Z D.
1811 'G88: tool diameter greater than the pocket'
DETECTION During the execution of the cycle.
CAUSE The tool radius is greater than the dimensions of the pocket (parameter J).
SOLUTION Select a tool with a smaller diameter.
1812 'G88: tool diameter smaller than L'
DETECTION During the execution of the cycle.
CAUSE The tool diameter is smaller than the finishing stock (parameter L).
SOLUTION Select a tool with a larger diameter.
1813 'G88: Tool diameter = 0'
DETECTION During the execution of the cycle.
CAUSE The tool diameter is 0.
SOLUTION Correct the value of the tool radius in the tool table or select another tool.
1814 'G88: Tool missing'
DETECTION During the execution of the cycle.
CAUSE Tool missing at the spindle.
SOLUTION Program a tool before the cycle or load a tool at the spindle.
1815 'G88: tool diameter smaller than C'
DETECTION During the execution of the cycle.
CAUSE The tool diameter is smaller than the milling pass (parameter C).
SOLUTION Reduce the milling pass or use a tool with a larger diameter.
1816 'The X parameter must be multiple of the I parameter'
DETECTION During the execution of a multiple machining cycle.
CAUSE The length of the machining operation (parameter X) must be multiple of the step
between machining operations (parameter I).
SOLUTION Assign a correct value to the parameters.
1817 'One of parameters I and K must be programmed'
DETECTION During the execution of a multiple machining cycle.
CAUSE The step between machining operations (parameter I) or the number of machining
operations (parameter K) has not been programmed.
SOLUTION Assign a correct value to the parameter.
1818 'J = 0'
DETECTION During the execution of a multiple machining cycle.
CAUSE In a multiple machining operation, parameter J (machining step along the ordinate
axis) is 0.
SOLUTION Assign a correct value to the parameter.