Fagor 8065, Error Solving Manual

Page: 173 / 220

Error solving manual.
CNC 8060
CNC 8065
·173·
(R
EF
: 1709)
8210 'Integer limits exceeded'
DETECTION During editing.
CAUSE The programmed integer value is too high.
SOLUTION The maximum value for an integer value is 4294967295.
8211 'The limits of the whole portion have been exceeded'
DETECTION During editing.
CAUSE The whole portion of the number has the wrong value.
SOLUTION The range of valid values for the whole portion of a number is ±99999.
8212 'The limits of the fractional portion have been exceeded'
DETECTION During editing.
CAUSE The decimal portion of the number has the wrong value.
SOLUTION The range of valid values for the decimal portion of a number is ±0.99999.
8213 'The format of the fractional portion have been exceeded'
DETECTION During editing.
CAUSE Too many decimal digits in a number.
SOLUTION The maximum number of decimal digits allowed in a number is 5.
8214 'Unknown flow controlling instruction'
DETECTION During editing.
CAUSE The instruction programmed after the "$" is wrong.
SOLUTION Check the syntax of the instruction.
8215 'Invalid function format'
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8217 'Floating limits exceeded'
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8218 'Wrong character'
DETECTION During editing.
CAUSE An invalid character has been detected in the block.
SOLUTION Check the syntax of the block.
8219' Empty error string'
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8220 'Empty warning string'
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8221 'Syntax Error'
DETECTION During editing and execution in MDI.
CAUSE Wrong syntax of the programmed instruction or variable.
SOLUTION Check the syntax of the instruction or variable in the programming manual.
8222 'Nonexistent M function'
DETECTION During editing.
CAUSE The programmed M function does not exist.
SOLUTION Check the existing M functions in the programming manual.