Error solving manual.
CNC 8060
CNC 8065
·108·
(R
EF
: 1709)
2300
'#CSROT orientation solution not valid or not found'
DETECTION
During execution.
CAUSE
The rotary axes of the kinematics could not be oriented to the programmed position
in the machine reference system.
SOLUTION
Deactivate function #CSROT or change the orientation.
2301
#CSROT orientation solution not found according to the criteria set in #DEFROT'
DETECTION
During execution.
CAUSE
The rotary axes of the kinematics could not be oriented to the programmed position
in the machine reference system, according to the criteria selected in #DEFROT.
SOLUTION
Deactivate function #CSROT or change the orientation.
2302
Discontinued #CSROT orientation solution with respect to what has been
programmed. Main rotary / Secondary rotary'
DETECTION
During execution.
CAUSE
The orientation of the rotary axes of the kinematics in the machine reference system
requires a movement with respect to the programmed value greater than the angle
defined in #DEFROT.
SOLUTION
Raise the value of the angle defined in #DEFROT.
2303
'Function CSROT can only be applied to kinematics of two spindle type, table type or
spindle-table type axes'
DETECTION
During execution.
CAUSE
The type of kinematics is not compatible with function #CSROT.
SOLUTION
Deactivate function #CSROT.
2307
'The axis cannot be activated as Hirth, because it is part of the #VIRTAX transformation'
DETECTION
During execution.
CAUSE
The CNC has tried to activate a Hirth axis while it belonged to the virtual tool axis
transformation, #VIRTAX.
SOLUTION
First deactivate the virtual tool axis transformation #VIRTAX and then activate the axis
as Hirth axis.
2308
'WARNING: The virtual tool axis transformation, #VIRTAX, has been deactivated'
DETECTION
During execution.
CAUSE
There has been some change in the situation of the axes belonging to the virtual tool
axis transformation (#VIRTAX).
SOLUTION
Check the program.
2309
'Programming not allowed while virtual tool axis transformation, #VIRTAX, is active'
DETECTION
During execution.
CAUSE
The CNC has tried to execute one of the following functions while virtual tool axis
transformation is active.
• Home search; G74.
• Modify software limits; G198 - G199.
• #OSC instruction.
SOLUTION
First cancel virtual tool axis transformation (#VIRTAX), then execute functions #OSC,
G74 or G198-G199, and finally activate #VIRTAX transformation back.
2310
'The axis of the virtual tool transformation, #VIRTAX, must be linear and must belong to
the channel'
DETECTION
During execution.
CAUSE
The CNC has tried to activate virtual tool axis transformation (#VIRTAX) with a rotary
axis or with an axis that does not belong to the channel.
SOLUTION
Check the program.
2311
'The virtual axis of the tool cannot be a main axis or belong to a kinematics'
DETECTION
During execution.
CAUSE
The CNC has tried to activate virtual tool axis transformation (#VIRTAX) with an axis
that belongs to the main trihedron or to a kinematics.
SOLUTION
Check the program.
Summary of Contents for 8065
