Fagor 8065, Error Solving Manual

Page: 139 / 220

Error solving manual.
CNC 8060
CNC 8065
·139·
(R
EF
: 1709)
3811 'Handwheel increment limit exceeded'
DETECTION In jog mode, while reading (counting) the pulses of a handwheel.
CAUSE Handwheel pulse reading (counting) increment too large.
SOLUTION Check the feedback connected to the handwheel input; signal levels, frequency, etc.
3812 'Handwheel refresh error'
DETECTION In jog mode, while reading (counting) the pulses of a handwheel.
CAUSE Wrong handwheel reading (counting).
SOLUTION Depending on the type of handwheel (CAN keyboard, CAN counter, local, RCS-S
module, etc.), check for coherence and communication level of the corresponding bus
as well as the feedback input connection.