Fagor 8065, Error Solving Manual

Page: 84 / 220

Error solving manual.
CNC 8060
CNC 8065
·84·
(R
EF
: 1709)
1763 'SURFACE MILLING: F = 0'
DETECTION During the execution of the cycle.
CAUSE The value of some F parameter is 0; the feedrate for roughing, finishing or Z-axis
penetration is missing.
SOLUTION Assign a value greater than 0 to the parameter.
1764 'SURFACE MILLING: S = 0'
DETECTION During the execution of the cycle.
CAUSE The value of some S parameter is 0; the speed for roughing or finishing is missing.
SOLUTION Assign a value greater than 0 to the parameter.
1765 'SURFACE MILLING: T = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter T of roughing and finishing operations is 0. No tool has been
programmed.
SOLUTION Program a tool for roughing or finishing operations. If an operation does not have a
tool, the cycle will not executed it; at least one operation must have a tool.
1766 'SURFACE MILLING: P = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter P is 0. No depth has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1767 'SURFACE MILLING: L = 0 and H = 0'
DETECTION During the execution of the cycle.
CAUSE The length (parameter L) and/or the width of the surface milling (parameter H) are 0.
SOLUTION Define both dimensions of the surface milling with a value other than zero.
1768 'POINT-TO-POINT PROFILE: F = 0'
DETECTION During the execution of the cycle.
CAUSE The value of some F parameter is 0; the feedrate for roughing, finishing or Z-axis
penetration is missing.
SOLUTION Assign a value greater than 0 to the parameter.
1769 'POINT-TO-POINT PROFILE: S = 0'
DETECTION During the execution of the cycle.
CAUSE The value of some S parameter is 0; the speed for roughing or finishing is missing.
SOLUTION Assign a value greater than 0 to the parameter.
1770 'POINT-TO-POINT PROFILE: T = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter T of roughing and finishing operations is 0. No tool has been
programmed.
SOLUTION Program a tool for roughing or finishing operations. If an operation does not have a
tool, the cycle will not executed it; at least one operation must have a tool.
1771 'POINT-TO-POINT PROFILE: P = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter P is 0. No depth has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1772 'POINT-TO-POINT PROFILE: Null profile'
DETECTION During the execution of the cycle.
CAUSE The first two points of the profile (P1 and P2) are the same; the cycle considers that
no profile has been defined.
SOLUTION Define the points of the profile correctly. Two identical points indicate the end of the
profile.