Error solving manual.
CNC 8060
CNC 8065
·78·
(R
EF
: 1709)
1693
#RTCP cannot be programmed with the current kinematics. Program #FACE or #CYL'
DETECTION
During execution.
CAUSE
The instruction is not allowed with the current active kinematics.
SOLUTION
Program the #FACE or #CYL instruction to activate that transformation.
1697
'Program #CSROT [ON]/OFF'
DETECTION
During execution.
CAUSE
The instruction and/or some of its parameters are programmed wrong.
SOLUTION
Check the program.
1698
'Program #DEFROT [action, criteria angle]'
DETECTION
During execution.
CAUSE
The instruction and/or some of its parameters are programmed wrong.
SOLUTION
Check the program.
1699
'Function CSROT cannot be applied to kinematics with manual or Hirth axes'
DETECTION
During execution.
CAUSE
CAUSE rotary axes of the kinematics must be continuously servo-controlled.
SOLUTION
Deactivate the instruction #CSROT.
1949
'The cutter cannot machine the whole profile'
DETECTION
While executing a roughing canned cycle, pattern repeat on a lathe.
CAUSE
The tool geometry makes it impossible for the tool to machine the whole programmed
profile.
CONSEQUENCE The cycle cannot machine the whole programmed profile.
SOLUTION
Change the profile or the tool so it can machine the whole profile.
1700
'CENTER PUNCHING: F = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter F is 0. No feedrate has been programmed.
SOLUTION
Assign a value greater than 0 to the parameter.
1701
'CENTER PUNCHING: S = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter S is 0. No speed has been programmed.
SOLUTION
Assign a value greater than 0 to the parameter.
1702
'CENTER PUNCHING: T = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter T is 0. No tool has been programmed.
SOLUTION
Assign a value greater than 0 to the parameter.
1703
'CENTER PUNCHING: P = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter P is 0. No depth has been programmed.
SOLUTION
Assign a value greater than 0 to the parameter.
1704
'CENTER PUNCHING: ALPHA = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter alpha is 0. No angle has been programmed.
SOLUTION
Assign a value greater than 0 to the parameter.
1705
'CENTER PUNCHING: DIAMETER = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of the parameter to define the diameter is 0.
SOLUTION
Assign a value greater than 0 to the parameter.
1706
'DRILLING 1: F = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter F is 0. No feedrate has been programmed.
SOLUTION
Assign a value greater than 0 to the parameter.
Summary of Contents for 8065
