Error solving manual.
CNC 8060
CNC 8065
·120·
(R
EF
: 1709)
2441
#FINALSUB programmed twice.
DETECTION
During block preparation.
CAUSE
The command #FINALSUB has been programmed more than once in the main
program. Only a single programming is permitted. Within loops (There is no error for
$IF, $FOR, etc. or in subroutines).
SOLUTION
Program #FINALSUB just once.
2443
The CNC must be restarted to assume the changes to the materials table.
DETECTION
During the execution of the command #MATERIAL or when activating/validating a
technology table.
CAUSE
The format of the table has been changed (units, new variables, listed range, etc.).
A restart is required for the CNC to utilize the new format.
SOLUTION
Restart the CNC.
Summary of Contents for 8065
