Error solving manual.
CNC 8060
CNC 8065
·43·
(R
EF
: 1709)
1309
'File name expected'
DETECTION
During execution.
CAUSE
No program has been selected for execution.
SOLUTION
Select the program to be executed.
1310
'Program line too long'
DETECTION
During execution.
CAUSE
Too many characters in the #EXBLK instruction.
SOLUTION
The maximum number of characters allowed is 128.
1311
'Measurement offset not included in programmed axis (axes)'
DETECTION
During execution.
CAUSE
The G102 function tries to exclude the measurement offset of an axis that has no
measurement offset included.
SOLUTION
The G102 function makes no sense for an axis without measuring offset.
1314
'#CS ON/#ACS ON: wrong identifier'
DETECTION
During execution.
CAUSE
In these instructions, the number of the coordinate system is not valid.
SOLUTION
Program a value between 1 and 5.
1315
'#CS ON/#ACS ON: undefined system'
DETECTION
During execution.
CAUSE
The instructions do not have parameters and no coordinate system has been stored.
When programming one of these instructions without parameters, the CNC tries to
activate the transformation stored last.
SOLUTION
Check the program. Define and save some coordinate system.
1316
'#CS/#ACS DEF: parameters missing'
DETECTION
During execution.
CAUSE
One or more required parameters have not been programmed.
SOLUTION
Check the program. These instructions require programming the coordinate system
number, the definition mode, the components of the translation vector and the rotation
angles.
1318
'#CS ON/#ACS ON: No changes allowed with the active coordinate system'
DETECTION
During execution.
CAUSE
The CNC has tried to change the parameters of an active coordinate system.
SOLUTION
Check the program. The CNC does not allow to change the parameters of an active
coordinate system; it does allow changing the parameters of a coordinate system that
has been already defined, but it is not active.
1319
'Nesting of #CS ON/#ACS ON instructions exceeded'
DETECTION
During execution.
CAUSE
The The CNC has exceeded the limit of coordinate system combinations.
SOLUTION
The allows combining different coordinate systems with each other to build new ones.
The CNC allows combining 10 coordinate systems.
1320
'Too many labels'
DETECTION
During execution.
CAUSE
The program has too many block labels. The labels to identify a block may be of the
following type
SOLUTION
The maximum number of labels for each type is 128. The labels may be represented
by the letter N followed by the block number or by [name] type labels.
1321
'Label name too long'
DETECTION
During execution.
CAUSE
The name of the label has too many characters.
SOLUTION
The maximum number of characters allowed is 15.
1322
'Label defined several times'
DETECTION
During execution.
CAUSE
The block label is repeated (duplicate) in the program.
SOLUTION
Eliminate the repeated labels.
Summary of Contents for 8065
