Error solving manual.
CNC 8060
CNC 8065
·172·
(R
EF
: 1709)
8050
'Error while loading the RIOR software'
DETECTION
During CNC startup.
CAUSE
Error when loading the software of the RIOR nodes.
SOLUTION
Verify the CAN configuration, system connection and boot versions of remote nodes.
If the error persists, contact the Service Department.
8051
'Error when restoring user session'
DETECTION
During CNC startup.
CAUSE
One of the files of the user session is not accessible or it is corrupt. The CNC data
related to coordinates, zero offsets, parts counter, kinematics, etc. may be lost.
SOLUTION
If the error persists after powering the CNC up several times, contact your supplier.
8200
'Lexer fault when recognizing integers'
DETECTION
During editing and execution in MDI.
CAUSE
Error when converting a string of characters into a numerical value. Some value
programmed in the instruction or variable is wrong.
SOLUTION
Check in the programming manual the values admissible for the parameters of the
instruction or indexes of the variable.
8201
'Lexer fault when recognizing floating values'
DETECTION
During editing and execution in MDI.
CAUSE
Error when converting a string of characters into a numerical value. Some value
programmed in the instruction or variable is wrong.
SOLUTION
Check in the programming manual the values admissible for the parameters of the
instruction or indexes of the variable.
8203
'Comment opening missing'
DETECTION
During editing.
CAUSE
The comment closing character has been programmed without having programmed
the opening character before.
SOLUTION
Check that the comments have both the opening and closing characters "(" and ")".
8204
'$ or # missing'
DETECTION
During editing and execution in MDI.
CAUSE
An instruction has been programmed without the # character or a flow controlling
instruction without the "$" character.
SOLUTION
All instructions must begin with the # character and all flow controlling instructions
must begin with the "$" character.
8205
'$ missing'
DETECTION
During editing.
CAUSE
A flow controlling instruction has been programmed without the beginning character
"$".
SOLUTION
Program "$" before the name of the control instruction.
8206
'# missing'
DETECTION
During editing.
CAUSE
An instruction has been programmed without the beginning character "#".
SOLUTION
Program "#" before the name of the instruction.
8207
'Name of the program or subroutine too long'
DETECTION
During editing.
CAUSE
The maximum number of characters allowed for the name of a program or subroutine
has been exceeded.
SOLUTION
The maximum number of characters allowed is 14.
8209
'Wrong active axis'
DETECTION
During editing.
CAUSE
The axis name has been programmed with the wrong wild character.
SOLUTION
The names of the axis with wild character are @1 through @5.
Summary of Contents for 8065
