®
®
Yale Z-Wave Plus v2 Smart Module
Installation Guide
®
Adding a Yale Z-Wave Plus v2 Smart Module to your Assure Lock & Z-Wave System
1. Open Z-Wave system's smart home or alarm app and follow instructions for removing a device
4. Press the 3 key followed by the icon
2. On your lock keypad, enter your master entry code followed by the icon
5. Remove Yale Smart Module from slot above battery compartment
3. Press the 7 key followed by the icon
6. If you're adding a new Yale Smart Module, follow instructions included with it
• Reinstall batteries
IMPORTANT:
Batteries must be removed before removing Yale Smart Module:
• Remove battery cover
• Remove Yale Smart Module
• Reinstall battery cover
• Remove batteries
P/N AYR-MOD-ZW3-MNL-0015 Rev A
®
®
Removing a Yale Z-Wave Plus v2 Smart Module from your Assure Lock & Z-Wave System
• Reinstall battery cover
2. Open Z-Wave system's smart home or alarm app on your smartphone or tablet
• Reinstall batteries
• Remove battery cover
• Remove batteries
3. If you have Smart Start* enabled with your Z-Wave System follow in-app prompts to add a new device
• Insert Yale Smart Module
If you don't have smart start or are not sure, follow steps 4 - 6
4. On your lock keypad, enter your master entry code followed by the icon
6. Press the 1 key followed by the icon
5. Press the 7 key followed by the icon
IMPORTANT:
Batteries must be removed before inserting Yale Smart Module:
1. Install Yale Smart Module into slot above battery compartment
Please use this procedure only when network primary controller is
missing or otherwise inoperable.
If prompted, scan QR code
*SmartStart enabled products can be added into a Z-Wave network by scanning the Z-Wave QR Code present on the product with a
controller providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within 10
minutes of being switched on in network vicinity.
