Error solving manual.
CNC 8060
CNC 8065
·60·
(R
EF
: 1709)
1506
'Undefined label or #RPT command labels swapped'
DETECTION
During execution.
CAUSE
The possible causes are:
• The second label has not been defined.
• M30 has been programmed between the first and the second labels.
• In the #RPT instruction, the second label has been programmed first and then
the first one.
SOLUTION
Check the program.
1507
'The second label of the #RPT must be programmed alone in the block'
DETECTION
During execution.
CAUSE
In a block repetitions (#RPT), the second label must be programmed alone in the
block without any other type of data.
SOLUTION
The last label must be programmed alone in the block. Program the command in the
previous line to execute it with #RPT or in the next line not to execute it with the #RPT.
1508
'G201 and active C axis are not allowed on the axes of the main plane'
DETECTION
During execution.
CAUSE
The possible causes are:
• One of the axes involved in function G201 is a C axis and is one of the first three
axes of the channel.
• One of the axes programmed in the #FACE instruction is in additive manual mode,
G201.
SOLUTION
Cancel the C axis or the additive manual mode.
1509
'#SET AX/#CALL AX: Offset programming has no effect'
DETECTION
During execution.
CAUSE
All the axes programmed in the instruction already belonged to the current
configuration and, therefore, the instruction only means a change of order
(sequence). In this case, the programmed offset option has no effect.
SOLUTION
Check the program.
1510
'The axis does not exist or is not available in the channel'
DETECTION
During execution.
CAUSE
The possible causes are:
• The CNC has tried to move an axis that does not exist or is not available in the
channel.
• The CNC has tried to execute an instruction that involves an axis that does not
exist or is not available in the channel.
• The CNC has tried to read or write a variable of an axis that does not exist or is
not available in the channel.
SOLUTION
Check the program.
1511
'The tool is not in the magazine'
DETECTION
During execution.
CAUSE
The CNC has tried to use the V.TM.P variable to read the magazine position of a tool
that is not there.
SOLUTION
It is only possible to read the position of the tools that are in the magazine.
1512
'Free or nonexistent magazine position'
DETECTION
During execution.
CAUSE
The CNC has tried to use the V.TM.T variable to read the number of a tool located
in a nonexistent magazine position.
SOLUTION
It is only possible to read the tool that is a in valid magazine position.
Summary of Contents for 8065
