Fagor 8065, Error Solving Manual

Page: 191 / 220

Error solving manual.
CNC 8060
CNC 8065
·191·
(R
EF
: 1709)
8445 'Wrong number of axes programmed'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The number of axes programmed
for this G function is wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8446 'The programmed G2/G3 block does not admit parameters I, J, K'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. 'The programmed G2/G3 block
does not admit parameters I, J, K to define the center of the interpolation.
SOLUTION Refer to the 8055 manual for the correct syntax.
8447 'The programmed function requires parameters I, J, K'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. Function G9 requires programming
the intermediate point (parameters I, J, K)
SOLUTION Refer to the 8055 manual for the correct syntax.
8452 'Thread programmed wrong'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. Function G33/G34 has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8454 'Wrong E parameter value'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. Wrong E parameter value in
function G49.
SOLUTION Refer to the 8055 manual for the correct syntax.
8455 'Wrong S parameter value'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. Wrong S parameter value in G
function.
SOLUTION Refer to the 8055 manual for the correct syntax.
8456 'Wrong L parameter value'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. Wrong L parameter value in
function G33/G34.
SOLUTION Refer to the 8055 manual for the correct syntax.
8457 'Wrong order (sequence) of axes'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The order (sequence) of the axes
in the block is wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8458 'Function or variable does not exist in the mill model'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The programmed function only
exists in the lathe model and the program is a milling program (pim file).
SOLUTION Change the name of the file or use the proper software.
8459 'Function or variable does not exist in the lathe model'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The programmed function only
exists in the mill model and the program is a lathe program (pit file).
SOLUTION Change the name of the file or use the proper software.
8460 'PROBE cycle does not exist in the lathe model'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The PROBE cycle does not exist.
SOLUTION Refer to the 8055 manual for available cycles.