Error solving manual.
CNC 8060
CNC 8065
·73·
(R
EF
: 1709)
1636
'The FACE and CYL transforms cannot be active at the same time'
DETECTION
During execution.
CAUSE
The CNC has tried to activate the #FACE or #CYL instruction while one of them was
active.
SOLUTION
Deactivate one of them before activating the other one.
1637
'Spindle turning direction incompatible with the tool'
DETECTION
During execution.
CAUSE
The pre-established tool rotating direction is incompatible with the current turning
direction of the spindle.
SOLUTION
Change the spindle turning direction or correct the turning direction defined for the
tool.
1638
'The axes of the angular transform, #ANGAX, must be linear'
DETECTION
During execution.
CAUSE
The CNC has tried to activate an angular transformation with a rotary axis.
SOLUTION
The axes of the angular transformation must be linear.
1639
'The programmed spindle does not belong to the channel'
DETECTION
During execution.
CAUSE
The CNC has tried to use a spindle of another channel.
SOLUTION
A channel can only control its spindles. Use a spindle that belongs to the channel o
include in the channel configuration the spindle causing the error.
1640
'Parked spindles cannot be programmed'
DETECTION
During execution.
CAUSE
The CNC has tried to use a parked spindle.
SOLUTION
Use a spindle that is not parked or unpark it.
1641
'#CYL: Expecting the programming of the cylinder development radius'
DETECTION
During execution.
CAUSE
The value of the developing radius is missing in the #CYL instruction.
SOLUTION
Check the programming for a variable radius, define a zero value so the CNC
calculates the radius depending on the position of the tool.
1642
'Slaved TANDEM spindles cannot be programmed'
DETECTION
During execution.
CAUSE
The user has tried to move or home the slave spindle of a tandem pair.
SOLUTION
The slave spindle of a tandem pair is controlled by the CNC, it cannot be moved
individually. To move a slave spindle, move the master spindle it is associated with.
1643
'TANDEM spindles cannot be parked'
DETECTION
During execution.
CAUSE
The CNC has tried to park a spindle that belongs to a tandem pair.
SOLUTION
Tandem spindles cannot be parked.
1644
'Spindles cannot be parked in G33/G95'
DETECTION
During execution.
CAUSE
The CNC has tried to park a spindle while function G33 or G95 was active.
SOLUTION
Cancel G33 and G95 before parking a spindle.
1645
'#RET/M17/M29 not allowed between the labels of a #RPT'
DETECTION
During execution.
CAUSE
The CNC has detected an M17, M29 function or #RET between the first and last labels
of a repetition of blocks #RPT.
SOLUTION
A subroutine cannot end inside a repetition of blocks.
1646
'Program: #ABORT [label]/#ABORT Nxxxx/#ABORT OFF'
DETECTION
During execution.
CAUSE
The syntax of the instruction is wrong or there is more data in the block.
SOLUTION
Check the program. The instructions must be programmed alone in the block, only
the block label may be added.
Summary of Contents for 8065
