Fagor 8065, Error Solving Manual

Page: 79 / 220

Error solving manual.
CNC 8060
CNC 8065
·79·
(R
EF
: 1709)
1707 'DRILLING 1: S = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter S is 0. No speed has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1708 'DRILLING 1: T = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter T is 0. No tool has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1709 'DRILLING 1: P = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter P is 0. No depth has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1710 'DRILLING 2: F = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter F is 0. No feedrate has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1711 'DRILLING 2: S = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter S is 0. No speed has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1712 'DRILLING 2: T = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter T is 0. No tool has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1713 'DRILLING 2: P = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter P is 0. No depth has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1714 'DRILLING 2: B = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter B is 0. No drilling peck has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1715 'THREADING: F = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter F is 0. No feedrate has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1716 'THREADING: S = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter S is 0. No speed has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1717 'THREADING: T = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter T is 0. No tool has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.
1718 'THREADING: P = 0'
DETECTION During the execution of the cycle.
CAUSE The value of parameter P is 0. No depth has been programmed.
SOLUTION Assign a value greater than 0 to the parameter.