Fagor 8065, Error Solving Manual

Page: 197 / 220

Error solving manual.
CNC 8060
CNC 8065
·197·
(R
EF
: 1709)
8522 #ROTATEMZ1-4 Pi/+i/-i.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8523 #POCKET2D BEGIN/END.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8524 #POCKET3D BEGIN/END.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8525 '#CAM SELECT[<cam,>"path\file"]'
DETECTION During editing and execution in MDI.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8526 '#CAM DESELECT[cam]'
DETECTION During editing and execution in MDI.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8527 '#REPOS <INT/INI> axisName/spindleName …'
DETECTION During editing.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual. After #REPOS
program a sequence of axes and/or spindles of the channel.
8558 'Incremental programming not allowed'
DETECTION During editing and execution in MDI.
CAUSE An incremental movement has been programmed (I command) in a function that does
not allow it.
SOLUTION Check the program.
8701 'Either a resource or a number is missing after the symbol'
DETECTION During editing.
CAUSE A resource is missing either after DFU, DFD, ERA or after the symbol of DEF/PDEF.
SOLUTION Program "DEF/PDEF symbol resource" or "DFU/DFD/ERA resource".
8702 'Resource before symbol'
DETECTION During editing.
CAUSE DEF or PDEF command. The resource has been programmed before the symbol.
SOLUTION Program "DEF/PDEF symbol resource".
8703 'Number before symbol'
DETECTION During editing.
CAUSE DEF or PDEF command. The number has been programmed before the symbol.
SOLUTION Program "DEF/PDEF symbol number".
8704 'A resource or number was expected instead of a symbol'
DETECTION During editing.
CAUSE DEF or PDEF command. Two symbols have been programmed.
SOLUTION Program "DEF/PDEF symbol resource" or "DEF/PDEF symbol number".
8705 'Resources cannot be redefined'
DETECTION During editing.
CAUSE DEF or PDEF command. Two resources have been programmed.
SOLUTION Program "DEF/PDEF symbol resource" or "DEF/PDEF symbol number".