Error solving manual.
CNC 8060
CNC 8065
·85·
(R
EF
: 1709)
1773
'POINT-TO-POINT PROFILE: Tool radius equal to or greater than the tangential entry/exit
radius'
DETECTION
During the execution of the cycle.
CAUSE
The radius of one of the tools used in the cycle is equal to or greater than the tangential
entry radius (radius of point P1) or of the tangential exit (radius of P12).
SOLUTION
Increase the radius of the tangential entry/exit or execute the cycle with a tool of
smaller radius.
1774
'PROFILE: F = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of some F parameter is 0; the feedrate for roughing, finishing or Z-axis
penetration is missing.
SOLUTION
Assign a value greater than 0 to the parameter.
1775
'PROFILE: S = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of some S parameter is 0; the speed for roughing or finishing is missing.
SOLUTION
Assign a value greater than 0 to the parameter.
1776
'PROFILE: T = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter T of roughing and finishing operations is 0. No tool has been
programmed.
SOLUTION
Program a tool for roughing or finishing operations. If an operation does not have a
tool, the cycle will not executed it; at least one operation must have a tool.
1777
'PROFILE: P = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter P is 0. No depth has been programmed.
SOLUTION
Assign a value greater than 0 to the parameter.
1778
'PROFILE: (FINISHING): Tool's cutting length < P'
DETECTION
During the execution of the cycle.
CAUSE
The cutting length of the finishing tool is smaller than the profile depth (parameter P).
SOLUTION
Choose as the finishing tool, a tool with greater cutting length.
1779
'SLOT MILLING: F = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of some F parameter is 0; the feedrate for roughing, finishing or Z-axis
penetration is missing.
SOLUTION
Assign a value greater than 0 to the parameter.
1780
'SLOT MILLING: S = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of some S parameter is 0; the speed for roughing or finishing is missing.
SOLUTION
Assign a value greater than 0 to the parameter.
1781
'GROOVING: T = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter T of roughing and finishing operations is 0. No tool has been
programmed.
SOLUTION
Program a tool for roughing or finishing operations. If an operation does not have a
tool, the cycle will not executed it; at least one operation must have a tool.
1782
'GROOVING: P = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter P is 0. No depth has been programmed.
SOLUTION
Assign a value greater than 0 to the parameter.
1783
'SLOT MILLING: L = 0'
DETECTION
During the execution of the cycle.
CAUSE
The value of parameter L is 0. The slot (groove) has no length.
SOLUTION
Assign a value greater than 0 to the parameter.
Summary of Contents for 8065
