Fagor 8065, Error Solving Manual

Page: 196 / 220

Error solving manual.
CNC 8060
CNC 8065
·196·
(R
EF
: 1709)
8510 #ABORT [expression]/[\"file_name\"]/Nexpression/OFF
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8511 #WARNINGSTOP["Text <%d>"<,value>]/[Integer].
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8512 Blank space not allowed in the name of a subroutine.
DETECTION During editing and execution.
CAUSE The subroutine name does not support blank spaces.
SOLUTION Address the subroutine naming issue.
8513 #DINDIST ON[0/1, ChannelNumber<,ChannelNumber,ChannelNumber>].
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8514 #DINDIST OFF.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8515 The first #DINDIST parameter must be 0 or 1.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8516 #DINDIST_EXEC_CYCLE[ChannelNumber].
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8517 #PATHND ON/OFF.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8518 #FEEDND ON/OFF.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8519 External variable without writing permission.
DETECTION During editing and execution.
CAUSE There is a read only variable or the CNC has momentarily locked the variable while
performing an operation with it.
SOLUTION If the variable is read only, it may not be written. If the CNC has locked the variable,
wait for it to finish with its operations.
8520 #DELETE nameVariableUser <, nameVariableUser, ...>.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.
8521 Only one axis can be programmed with G174.
DETECTION During editing and execution.
CAUSE The syntax of the instruction is wrong.
SOLUTION Check the syntax of the instruction in the programming manual.