Fagor 8065, Error Solving Manual

Page: 62 / 220

Error solving manual.
CNC 8060
CNC 8065
·62·
(R
EF
: 1709)
1522 'Negative value not allowed'
DETECTION During execution.
CAUSE A negative number of block repetitions (NR) has been programmed.
SOLUTION Check the program.
1523 'POS and T must be programmed in the same block'
DETECTION During execution.
CAUSE The tool T and the position POS has not been programmed in the same block.
SOLUTION The tool T and the position it must be occupied in the magazine must be programmed
in the same block.
1525 'The axis cannot be exchanged'
DETECTION During execution.
CAUSE The CNC has tried to change a channel axis (#CALL, #SET oR #FREE) and the axis
does not have permission to change (parameter AXISEXCH).
SOLUTION In order for the CNC to be able to change the channel axes and spindles, they must
have permission. Parameter AXISEXCH sets whether the axis or the spindle has
permission to change channels and if it does, whether the change is temporary or
permanent; in other words, whether the change is maintained after an M02, M30, a
reset or after restarting the CNC.
1526 '#EXEC: the indicated channel is not a CNC channel'
DETECTION During execution.
CAUSE The CNC has tried to use the #EXEC instruction to execute a program in a channel
that is not a CNC channel, but a PLC channel.
SOLUTION Check the program.
1527 'Wrong identifier after %'
DETECTION During execution.
CAUSE In the instruction #MSG, #ERROR or #WARNING, an invalid identifier has been
programmed.
SOLUTION The valid identifiers are %D or %d to display a number and %% to display the
character "%".
1529 'Expecting list of identifiers or "]" after end-quotes'
DETECTION During execution.
CAUSE In the instruction #MSG, #ERROR or #WARNING , an invalid character has been
programmed after the message to be displayed.
SOLUTION Check the program. After the end-quotes of the message to be displayed, it only
admits the list of variables or parameters to be included in the text.
1530 'G53 cannot be programmed with polar coordinates'
DETECTION During execution.
CAUSE The final point has been defined with Polar or Cylindrical coordinates in function G53.
SOLUTION When programming referred to machine zero (home), the points must be defined only
with Cartesian coordinates.
1531 'Program: #EXBLK [block, channel]'
DETECTION During execution.
CAUSE The syntax of the instruction is wrong or there is more data in the block.
SOLUTION Check the program. The instructions must be programmed alone in the block, only
the block label may be added.
1532 'Program: #MASTER <spindle name>'
DETECTION During execution.
CAUSE The syntax of the instruction is wrong or there is more data in the block.
SOLUTION Check the program. The instructions must be programmed alone in the block, only
the block label may be added.
1533 'Program: #FREESP [sp1, sp2, ..]'
DETECTION During execution.
CAUSE The syntax of the instruction is wrong or there is more data in the block.
SOLUTION Check the program. The instructions must be programmed alone in the block, only
the block label may be added.