Fagor 8065, Error Solving Manual

Page: 190 / 220

Error solving manual.
CNC 8060
CNC 8065
·190·
(R
EF
: 1709)
8434 '(GOTO N(expression))'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8435 '(RPT N(expression),N(expression))'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8436 '(IF condition action1 <ELSE action2>)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8437 '(SUB integer)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8438 '(RET)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has not been
programmed alone in the block or it has not been programmed.
SOLUTION Refer to the 8055 manual for the correct syntax. The instruction must be programmed
alone in the block.
8439 '(CALL expression)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8440 '(PCALL/MCALL/PROBE expression <,param>)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8441 '(MDOFF)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has not been
programmed alone in the block or it has not been programmed.
SOLUTION Refer to the 8055 manual for the correct syntax. The instruction must be programmed
alone in the block.
8442 '(EXEC P(expression) <,directory>)'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The instruction has been
programmed wrong.
SOLUTION Refer to the 8055 manual for the correct syntax.
8443 'Action not allowed in IF instruction'
DETECTION During editing.
CAUSE Error when programming in 8055 CNC language. The actions programmed in the IF
instruction are not valid; the actions can neither be IF nor SUB.
SOLUTION Refer to the 8055 manual for the correct syntax.