Error solving manual.
CNC 8060
CNC 8065
·203·
(R
EF
: 1709)
9309
'If the number of magazine is 0, ground tools must be allowed'
DETECTION
During the validation of the machine parameters.
CAUSE
The machine does not have any tool magazines and does not admit ground tools.
SOLUTION
In order to change the tool on a machine without tool magazines, the machine must
admit ground tools (parameter GROUND).
9310
'The spindle speed override cannot be changed while threading if feedforward < 90%'
DETECTION
While validating the machine parameters or while executing a G33 thread.
CAUSE
The spindle override cannot be modified while thread cutting if the feed-forward is
lower than 90% to avoid damaging the thread.
SOLUTION
Increase the feed-forward of the spindle.
9311
'A TANDEM axis cannot be in a MUTIAXIS group'
DETECTION
On CNC power-up or when validating the machine parameters.
CAUSE
One of the axes belongs to a tandem pair and to a MULTIAXIS group.
SOLUTION
Correct the tandem and multi-axis table. An axis can only be in one of the two
configurations.
9312
'A GANTRY axis cannot be in a MUTIAXIS group'
DETECTION
On CNC power-up or when validating the machine parameters.
CAUSE
One of the axes belongs to a gantry pair and to a MULTIAXIS group.
SOLUTION
Correct the gantry and multi-axis table. An axis can only be in one of the two
configurations.
9313
'Wrong DRIVEID of the axis of the MULTIAXIS group in the system'
DETECTION
On CNC power-up or when validating the machine parameters.
CAUSE
There is no axis in the system having the same DRIVEID as the one indicated when
defining a MULTIAXIS group.
SOLUTION
Assign a DRIVEID insde the MULTIAXIS groups that is associated with the axes of
the system.
9314
'A SERCOS axis of the multi-axis group has a different DRIVEID'
DETECTION
On CNC power-up or when validating the machine parameters.
CAUSE
Not all the axes of a MULTIAXIS group are connected to the same drive (parameter
DRIVEID).
SOLUTION
All the Sercos axes of a MULTIAXIS group must be associated with the same drive
and, therefore, their parameter DRIVEID must be identical.
9315
'There are more sets in the group than at the drive'
DETECTION
On CNC power-up or when validating the machine parameters.
CAUSE
There can only be 8 gears and there are more parameter sets in a MULTIAXIS group
than 8.
SOLUTION
Decrease the number of axes of the MULTIAXIS group or decrease the number of
parameter sets of the axes of the group.
9316
'The axes of the group do not have the same OPMODEP: all velocity feedback or all
position feedback'
DETECTION
On CNC power-up or when validating the machine parameters.
CAUSE
There is a multi-axis group whose axes do not have the same parameter OPMODEP.
SOLUTION
Check the machine parameters. All the axes of a multi-axis group must have the
OPMODEP parameter set the same way.
9317
'Group of axes with different feedback: All SERCOS axes must be velocity Sercos'
DETECTION
During the validation of the machine parameters.
CAUSE
There is a multi-axis group whose axes do not have the same parameter
COUNTERID and the axes are not velocity-Sercos.
SOLUTION
Check the machine parameters. All the axes of a multi-axis group must have identical
parameter COUNTERID; if the parameter is not identical, the axes must be velocity-
sercos.
9318
'Two axes in different multi-axis groups with the same COUNTERID in one of their sets'
DETECTION
On CNC power-up or when validating the machine parameters.
CAUSE
There are axes in different multi-axis groups that share the same feedback input.
SOLUTION
Change parameter COUNTERID of the axes involved so they do not share the same
feedback input.
Summary of Contents for 8065
