IBC MVE2 Series, Quick Start Manual

Page: 1 / 8

www.ismacontrolli.com
The performances stated in this sheet can be modifi ed without any prior notice.
page 1 DBL394en | 1
st
Issue rev. 8 | 07/2022
MVE2xx
Globe Valves Actuators
MODEL
FORCE
[N]
POWER
SUPPLY
DESCRIPTION
MVE204 400
230 V AC
±10%
Long yoke, modulating/
floating control
MVE206 600
MVE210 1000
MVE215 1500
MVE222 2200
MVE204S 400
230 V AC
±10%
Short yoke, modula-
ting/floating control
MVE206S 600
MVE210S 1000
MVE215S 1500
MVE222S 2200
APPLICATION AND USE
MVE2xx is a flexible electro-mechanical actuator for the control of two and three way globe valves in:
• heating and cooling systems
• Air Handling Units
• district heating plants
• industrial temperature control systems.
MVE2xx can be controlled either by a proportional (modulating) signal or by an increase/decrease (Floating) signal.
It is easy to mount and connect the actuator. Direct mounting is possible to any iSMA CONTROLLI flanged valve. Linkage kits are avai-
lable for iSMA CONTROLLI threaded valves as well as for valves of other manufacturers (table page 3).
The actuator has a fine resolution (500 steps on the full stroke range) for exacting fluid control and it is able to self-calibrate on a
different stroke without the need of any user action (this function is DIP switch selectable on the field).
MVE2xx has intelligent behaviour and alarm functionality in case of unexpected operation, feedback of alarms to the user is provided
by LEDs (GREEN and RED) on the control board.
N.B.: Do not use the actuator if not coupled with its relating valve.
TECHNICAL CHARACTERISTICS
DESCRIZIONE
MVE204
MVE204S
MVE206
MVE206S
MVE210
MVE210S
MVE215
MVE215S
MVE222
MVE222S
Supply voltage F N 230 V AC ±10%, 50-60 Hz
Power consumption (running) 10 VA/4,5 W 13 VA/6 W 18 VA/8 W 21 VA/11 W 25 VA/10 W
Power consumption (holding) 8 VA/4 W 11 VA/5 W 11 VA/5 W 13 VA/7 W 10 VA/4 W
Running
time
Modulating
15 s (for valves with stroke from 5 to 15 mm)
60 s
(for valves with
stroke from 5 to
60 mm)
20 s (for valves with stroke from 15 to 25 mm)
30 s (for valves with stroke from 25 to 60 mm)
Increase/decrease 60 s
Stroke 5-60 mm (limited to 30 mm for MVE.S)
Force 400 N 600 N 1000 N 1500 N 2200 N
Duty cycle max 50%/60 minutes
Analogue input Y M
Voltage 0-10 V - impedance > 100 kΩ (range: 0-10 V DC, 2-10 V DC, 0-5/2-6 V DC, 5-10/6-10 V DC)
500 Ω (range 4-20 mA)
Digital inputs Y1 Y2 Connection of Y1, Y2 to M
Output V+ Voltage 16 V DC ± 0,5 V, max load 25 mA,
sales@ibc.ie (ROI/INTL.)
bill@ibc.ie (NI/UK)
DISTRIBUTION PARTNER: