temperedwater.com
5330 East 25th St.
Indianapolis, IN 46218
Phone (317) 261-1212
Fax (317) 261-1208
INSTALLATION &
MAINTENANCE MANUAL
Design and specifications subject to change without notice.
Please refer to
temperedwater.com
to ensure most
current data sheet and other design solutions.
temperedwater.com/patents
M 410 C
ASSE 1070 Approved
ASSE Lead Free Certified
Certified to CSA B125.3
NOTICE!
No mixing valve will work satisfactorily if improperly installed. We suggest, therefore, that you read
these instructions carefully before installing and follow directions as outlined. Handle the mixing valve with care.
Model 410
Thermostatic Mixing Valve
CAPACITIES – MODEL 410
Pressure Drop PSI
5
10
20
30
45
60
Valve
Number
Capacity
410-GPM
5 8 12 15 20 24
410-LPM
19 30 45 56 75 91
1/4 gpm when properly installed in recirculated system.
The minimum flow of the Series 410 is 1 GPM.
72146_410-75_STD_DRW_NODIMS.pdf
B
C
A
DIMENSIONS
Valve Number
A
B
C
410
9-1/2” 4-1/2” 5-1/2”
Dimensions are for reference purposes only. For rough-in dimensions
please refer to Lawler’s Revit/BIM models found at temperedwater.com.
Inlets & outlet are 3/4” NPT.
CAUTION: When maintaining and adjusting the
mixing valve, all fixtures should be isolated from
use. Lawler Manufacturing Co., Inc. recommends
that you work safely at all times and in a manner
consistent with the OSHA Lock/Tagout standard,
29 CFR 1910.147 and other applicable standards.
This installation & maintenance manual covers all
configurations of the Model 410.
