Mova D506i Скачать руководство пользователя страница 108

Страница: 108 / 644

106

Using

the
Phonebook

Search

Phonebook

Making a Call from the Phonebook (continued)

Address search

You can enter part of a mail address and search for the Phonebook entry which
contains a mail address including those characters.

On the Phonebook search screen, select “search type”

“4.e-mail” from the

submenu.

Enter part of the mail address.

The Phonebook entry which contains a mail address including the entered character is selected.

•

Single-byte alphanumeric characters can be entered. You can use

to switch Entry mode (in

the 5-press Method).

•

The operating procedure is the same as directed in

Reading search (see p.104).

The column tab appears at the top of the screen, and the Phonebook entry
beginning with the column of the selected tab appears.

•

Press

to display Phonebook entries with readings that begin with the

next column. Press

to display entries in the reverse order.

▲

Group search

You can select the group name and search for a Phonebook entry saved in the group.

•

Phonebook entries for which no group setting was set are classified under “group 00”.

On the Phonebook search screen, select “search type”

“5.group” from the

submenu.

Only those groups that have Phonebook entries that can be searched are
displayed.

Select a group and press

(select).

The group name tab appears at the top of the screen, and the Phonebook
entries saved in the selected group appear.

•

Use

to switch groups.

•

Search results display order (see p.104)

•

You can search by entering a reading. Operating procedure: Steps in
Reading search (see p.104).

▲

Содержание D506i





































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание D506i

Отзывы:

Похожие инструкции для D506i

Бренды по названию

Популярные бренды

Mova D506i, Руководство пользователя

Результаты поиска

Содержание D506i

Отзывы:

Похожие инструкции для D506i

Бренды по названию

Популярные бренды