manualshive.com logo in svg

Mova D506i, Руководство пользователя

Поделиться
Скачать
Mova D506i Скачать руководство пользователя страница 21

19

SAFETY

PRECAUTIONS

–

Always

follow

these

d

irections–

Handling the battery

■

Check the battery type indicated on the
battery label.

Indication

Battery type

リチウムイオン

Lithium ion battery

CAUTION

Do not use the Compact light for purposes other than for use with the
camera.

• The Compact light is turned off in about 3 minutes if no action is taken. In such a

case, the surrounding environment could suddenly become dark, possibly
inadvertently causing an accident.

Do not insert your finger or the strap in the antenna section when
opening the mova.

• Doing so could cause personal injury or damage the phone.

When you attach the battery to the mova, never attempt to forcefully
insert. The battery should slide in easily and fit correctly. Check the
direction of the battery and try again.

• Doing so could cause the battery to leak, overheat, rupture, or catch fire.

If electrolyte from the battery gets in your eyes, do not rub; instead, rinse
immediately with copious amounts of clean water and seek medical attention.

• Doing so could cause the loss of vision.

Do not pierce the battery with nails, hammer on it, or step on it.

• Doing so could cause the battery to leak, overheat, rupture, or catch fire.

Do not expose the battery to water.

• The battery could overheat, cause electric shock, or be damaged if exposed to water,

pet urine, or other liquids. Do not use the adapter in locations where it could be
exposed to liquids.

Do not attach metallic materials such as wire to the port. Do not carry or
store the battery together with a necklace or other metallic items.

• Doing so could cause the battery to leak, overheat, rupture, or catch fire.

DANGER

Do not use or place the battery close to a fire, stove, or other heating
device.

• Doing so could cause the battery to leak, overheat, rupture, or catch fire.

Do not throw the battery into a fire.

• Doing so could cause the battery to leak, overheat, rupture, or catch fire.

Содержание D506i





































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды