Mova D506i Скачать руководство пользователя страница 457

Страница: 457 / 644

455

Call Forwarding Service

Using

etwork

Services

Call

Forwarding

Service

This service is optional (free of charge) requires a
subscription.

•

A call to your mova can be forwarded to your office, home, etc.

•

You can make or receive calls even when the service is activated.

•

When a call arrives while your mova is able to receive it, the forwarding ringtone sounds and the

call reception screen appears. The forwarding ringtone can be changed (see p.118).

•

You can answer a call while the forwarding ringtone is sounding. The ring time can be changed

(see p.456).

•

Even if you subscribe to both the Call Forwarding Service and Voice Mail Service, they cannot be

used at the same time.

The Call Forwarding Service is deactivated automatically when the Voice Mail Service is

activated.

•

If a “user unset” call is received while the Caller ID Display Request Service is activated, an

announcement that requests to inform the Caller ID is played (Calls are not forwarded).

•

While the Call Forwarding Service is activated (while in forwarding), you cannot receive a call

using Collect Call Service.

For details, see the “Network Services General User’s Manual”.

When your phone cannot
receive signals, is turned
off, or does not answer a
call, a call is automatically
forwarded to the
forwarding phone number.

Available within
the service areas
all over Japan.

A call is forwarded
anywhere in
Japan.

The Call Forwarding Service is handy in a number of ways.

Basic procedure for the Call Forwarding Service

Action

Activate the service.

Your mova receive a call.

If not answered, the call is automatically forwarded.

Action

The caller is connected to the forwarding phone number.

Set a forwarding phone number.

Содержание D506i





































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание D506i

Отзывы:

Бренды по названию

Популярные бренды

Mova D506i, Руководство пользователя

Результаты поиска

Содержание D506i

Отзывы:

Бренды по названию

Популярные бренды