Mova D506i Скачать руководство пользователя страница 255

Страница: 255 / 644

253

Using

the
Timer

Schedule

Functions

Private

iary

Enter the details.

Select the “contents” field and press

(select).

Enter the details (up to 200 single-byte or 100 double-byte characters).

Press (store).

The Schedule entry is saved.

•

If 100 Schedule activities are already saved, a prompt appears. Select “YES” if you want to
overwrite and press

(select). The oldest activity is overwritten in order. To cancel the

operation, select “NO”.

Set the alarm tone.

Select the “alarm tone” field and press

(select).

Select the melody, and press

(select).

•

The Melody list (see p.119)

•

As you select, selected melody is played twice. (No sound is heard when you set to not play
ringtone.) To stop playback, press any numeric key.

•

When you select “link set sound”, the alarm tone set in Sound setting sounds.

Set the alarm volume.

Select the “alarm volume” field and press

(select).

Select the volume and press

(select).

•

When you select “link adjust volume”, the alarm volume in Sound setting sounds.

Set the vibrator.

Select the “vibrator” field, and press

(select).

Select a pattern and press

(select).

•

When patterns are changed using

, the phone vibrates according to the selected pattern.

To stop the vibration in the middle, press any numeric key.

•

Select “off” to turn off the vibration.

•

When you select “link vibrator”, the alarm tone in Vibrator setting vibrates.

Set the pre-alarm.

Select the “alarm” field, and press

(select).

Use

to enter the time, and press

(fix).

•

You can set a time period between 0 and 99 minutes.

•

Use

to increase or decrease numbers.

•

If you make a mistake, press

to delete the number and reenter the correct one.

Содержание D506i





































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание D506i

Отзывы:

Mova D506i, Руководство пользователя, Страница: 255 / 644

Результаты поиска

Содержание D506i

Отзывы: