Mova D506i Скачать руководство пользователя страница 126

Страница: 126 / 644

124

Changing

the

ingtone

Recording a sound to Be Used as a Ringtone (continued)

Record

Sound

Playing a recorded sound

In standby, select “setting”

“sound

•

vibrator”

“REC SND melody” from the

menu.

The Record sound list appears.

Select a recorded sound and press

(play).

The recorded sound is played back twice. (No sound is heard when you set the phone to not play
sounds.)

•

A prompt appears asking whether to play back while in Manner Mode or Drive Mode. Select
“YES” to play back and then press

(select). To not play back, select “NO”.

•

To stop sound playback, press

(stop).

•

To adjust the sound volume level, press

to select a sound level and then press

(set).

Editing the title of recorded sound

Select a recorded sound from the recorded sound list, and select “edit title”
from the submenu.

Edit the title.

Press (select).

Press

to delete unnecessary characters and then enter the new title (up to 50

single-byte or 25 double-byte characters).

Press (store).

The title is changed.

▲

Title

•

Date and time are set when recorded. They can be changed.

•

“(no title)” appears if you store a recorded sound without a title.

•

Recorded sounds can also be played back using the Melody Player or by selecting “data box” from the
menu (see p.529, 538).

N o t e

•

The sound title set in the Phonebook cannot be edited in the followings :
Edit the title after canceling the setting.

・

When Phonebook Access Lock is set

・

When Phonebook Store Lock is set

・

When Phonebook Delete Lock is set

・

When Keydial Lock is set

・

When the sound is set in the Phonebook entry which is set to Accept Calls/Reject Calls

Содержание D506i





































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание D506i

Отзывы:

Бренды по названию

Популярные бренды

Mova D506i, Руководство пользователя

Результаты поиска

Содержание D506i

Отзывы:

Бренды по названию

Популярные бренды