Mova D506i, Руководство пользователя

Страница: 569 / 644

567
Character
Entry
5
-press
Method
20
Entering single-byte katakana characters
Single-byte katakana characters or symbols (“ ？ ”, etc.) can be entered in the kana mode.
•
Note that double-byte katakana characters can be entered in the kanji mode.
1
In the character entry screen, press (letter) to switch to the kana mode.
To restore “
ありがとう
” which is fixed by Predictive Conversion.
Example
After the character is entered, converted and (fix) is pressed, you can press to restore the characters
to their pre-fixed states. This function is effective in kanji mode.
•
The characters cannot be restored when the cursor is moved or the new line is started after fixation.
To restore fixed characters
▼
あか い 赤い
▼
赤い
▼
あかい
(fix)
(convert)
▼
あ ありがとう
▼
あ
(fix)
To restore fixed character which was converted normally.
Example
[ カナ ] appears.
2
Use the numeric keys to enter “ ｽｽﾞｷ ”.
3 Press (fix).
Characters are fixed.
ｽ →
Press 3 times.
Press to move the cursor 1 position to the right.
ｽ → Press 3 times.
ﾞ → Press .
ｷ →
Press twice.
•
Single-byte katakana characters should not be used when you send mail to other than i-mode compatible
mobile phones, as such characters may not be correctly displayed at the receiving side.
N o t e
•
Character Assignment Table (see p.586).
•
If you make a mistake, use to delete the character, and reenter the correct one.
•
When or is pressed, it is not necessary to move the cursor even if the characters are
assigned to the same key.
•
When a different numeric key is pressed while entering characters, the cursor moves
automatically.
•
Press to display characters in reverse order (see p.560).
Common phrases, symbols and pictographs can be entered using the special mode.
The characters can also be entered using Character Map Code from the special mode.
Entering Common phrases
1 Press (special) in the character entry screen.