Mova D506i, Руководство пользователя

Страница: 528 / 644

526
Checking Call Time and Charge (continued)
Using
Other
Functions
19
Checking
Call
Time
and
C
harge
■
“ ¥** ” appears in the following cases:
•
Charges for calls and operations given below (Note that the charges for such calls and operations will
not be added to the total call charge displayed on your mova D506i, and thus the actual total charges
will differ from those indicated on the phone.)
•
International call services other than DoCoMo*
•
Calls to the Shinkansen
•
Collect calls
•
Telegrams
•
Interrupted calls
•
Voice Mail Service using remote control function
* The charges can be displayed when using WORLD CALL (DoCoMo international calls).
•
Calls made to the listed services that are free of charge
About the call charge display
Voice Mail Service
(see p.449)
Charges appears for 1416, and for 1417 when it is used to play the
saved messages.
Call Forwarding Service (see p.456)
Access Number Service
1490 and 1491 operation
Caller ID Display Request
Service
148 operation
Nuisance Call Blocking
Service
144 operation
English Announcement
Service
1458 operation
Stopping/starting remote
control function
159 operation
Service
Operations not charged
•
Charges for calls made to toll-free numbers beginning with 0120 or NTT toll-free numbers
■
“
¥
0” appears in the following cases:
•
Calls that are forwarded from your mova to forwarding phone number by Call Forwarding Service.
•
Calls made to your toll-free number when you subscribe to the Toll-Free Number Service (The charges
for such calls will not be added to the total call charge displayed on your mova, but will be included on
your monthly phone bill at the rate applied when you make calls.)
■
When you use NTT’s directory assistance (104) from your mova:
A flat 140 yen appears as the call charge. Total call charge also has 140 yen added for each call. The
charge billed will be the inquiry cost plus the actual call charge.
3 Select “YES” and press (select).
Accumulated call time and charge are reset.
•
To cancel the operation select “NO”.
Resetting the total call time and charge
1
In standby, select “setting” “cost
•
check” “reset total” from the menu.
2 Enter your 4-digit terminal ID number.
▲ ▲
•
Note that Call Time and Call Charge are estimates and may differ slightly from actual ones.
•
When no Clock setting is made, the date of “last reset date” appears as “00/00/00” and the time as “00:00”.
•
If you perform “reset total” while appears in the Standby screen, is no longer displayed.
N o t e
M4 14
▲