manualshive.com logo in svg

Mova D506i, Руководство пользователя

Поделиться
Скачать
Mova D506i Скачать руководство пользователя страница 36

34

Checks

Before

Use

1

Attaching and Removing the Battery

Attaching

a

nd

Removing

the

B

attery

•

Be sure to turn off the power with the mova closed when attaching and removing the battery.

•

Be careful not to touch the camera.

Remove the rear cover.

While pressing the top of the rear cover with your thumb,
slide it in the direction of the arrow until it is removed.

1

Remove the rear cover.

1

Insert the battery connector into the phone at
the angle shown in the illustration.

Do not force the battery connector into the phone.
Doing so could damage the body connector or the
battery connector terminals.

2

Insert the battery.

3

Place the rear cover on the phone leaving it
about 5 mm away from its closed position.

4

Slide the rear cover into place.

Failure to follow the correct procedure could damage
the rear cover.

5

Remove the battery.

Grasping the projections on the battery, remove the
battery from the phone.

2

The phone uses a lithium polymer battery containing valuable materials that should be recycled. To protect
the environment, return used batteries to an NTT DoCoMo service center, NTT DoCoMo agent or recycling
center.

•

Please take the following precautions when recycling batteries:

•

Attach a piece of adhesive tape on the used battery terminals.

•

Do not disassemble or modify batteries.

Battery recycling

Li-ion

The mova main display and Inspiration window use an active LCD. Depending on the
characteristics of the active LCD, afterimages or crossbar may remain for several seconds
when the battery is being attached or removed. Do not be concerned; this is not a fault.

Attaching the battery

Removing the battery

Содержание D506i





































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды