9-2
TI71M01D06-01EN 3rd Edition: 2012.12.01
9.2 Backup and Restore Operations of User Data
It is recommended to back up user data to avoid data loss in case of accidents.
Backed up data is useful when startup new devices. For example, it is possible to restore
particular backed up data on several drives to use the same settings for each of them.
Backup and restore operations can be performed using the following methods.
Backup and Restore Operations Using the Utility Software
By backing up user data using the utility software, the data can be saved as electronic files.
See Section 8.7.4, "Backup" for more information.
Backup and Restore Operations Using the Operation Display Pendant (Optional)
By backing up user data using the operation display pendant, the data can be saved in the
embedded EEPROM of the operation display pendant. User data for multiple drives can be
stored without using other external devices. See the technical document of the operation
display pendant for more information.
9.3 Initialization of User Data (Reset All)
[Reset All] refers to returning all user data to the settings at the time of shipment from the
factory. Perform [Reset All] when you want to redo the drive settings from the scratch.
Operating Procedure
The reset all operation can be performed only by entering the designated command in
[Terminal Function] of the utility software or [Terminal Function] of the operation display panel
in order to prevent an erroneous operation. Erroneous operation can also be prevented by
requiring a password with command. The command format is as follows.
@90 : 2003
Password
Make sure not to terminate control power supply while All-Reset function is in execution.
All-Reset needs more 5 (five) seconds for the completion. “10.0x (Data Sum Error)” may
occur in case that the control power supply is terminated in this while.
Execute All-Reset again if the error occurs.
CAUTION