8-17
TI71M01D06-01EN 3rd Edition: 2012.12.01
(2) Basic
Usage
The basic usage is the same as for a general oscilloscope. The following describes the actual
operating procedure using a basic usage as an example.
Loading a Waveform with a Single Trigger
The following describes the procedure for loading a waveform with the most basic single
trigger.
1
2
3
4
5
Wave Setting dialog box
(1) Display the Wave Setting dialog box.
(2) Select the #parameter/#monitor number
you want to monitor. Select an analog
mode.
(3) Set up trigger conditions.
Single trigger
Rising edge
(4) Set up a trigger source.
Source channel: 1
Trigger level:
10000 UNIT/div
Trigger position: 2
(5) Start.