6-95
TI71M01D06-01EN 3rd Edition: 2012.12.01
Setting #parameters Related to Increment Positioning Move
Setting #parameters Related to Increment Positioning Move
STEP 1 Select [Data Management], [#parameter] and then [Function parameter] from the
utility software.
STEP 2 Select [ABS/INC move] from [Function parameter].
STEP 3 Set the feed velocity, acceleration time, deceleration time, position settling width,
maximum velocity and velocity override percentage.
STEP 4 Set and register #parameters.
(2) How to Perform Table Data Operation (Utility Software)
STEP 1 Select [Operation] in the utility software.
STEP 2 Select the Table Operation tab in the Operation menu.
STEP 3 Click the [Servo-ON] button to turn the motor's servo ON.
STEP 4 Select the table number of the table data you want to execute.
STEP 5 Click the [Drive] button to execute the selected table data.
(3) How to Perform Increment Positioning Move (Controller Interface)
See Section 6.4.1 (3), "How to Perform Table Data Operation (Control Interface)."