8-36
TI71M01D06-01EN 3rd Edition: 2012.12.01
8.6.2 Table Data Function
The table data function is used to set and correct the operation table data of No.'s 0 to 63
stored in the drive. Each table of the internal table data consists of 8 bytes (16 bits + 16 bits +
32 bits). Table data can be created by a comprehensive wizard by using the table data
function. Also, the move, copy and delete functions can easily be executed in units of tables
by pressing the [Table copy] & [Table paste] button.
Three data indicated by “*” is raw operation table data. They are called “operation register,”
“table data 0” and “table data 1” from the top. “Operation register” is common in each
operation. The use of “table data 0 and 1” vary depending on the operation code selected.
The selected table number can be edited.
*
The contents of operation parameters 0 and 1 change
according to the operation code selected.
TIP