6-62
TI71M01D06-01EN 3rd Edition: 2012.12.01
Pausing/Ending Operation
IN_ABORT
The IN_ABORT command interrupts table data operation.
Use this command to end a test operation or to interrupt an operation and decelerate and
stop the motor. Even during an operation involving movement, this command immediately
decelerates and stops the motor, and terminates the operation.
When it is turned ON, a command to stop operation is issued.
If the M function is being executed, it interrupts the execution and stops the operation.
IN_STOP
Use this command only when the continue function is set to valid.
If you issue the IN_STOP command, table data operation is ended at the same time as the
operation of the table data currently being executed is completed.
When it is turned ON, a command to stop operation is issued.
If the M function is being executed, OUT_MODE_EXE turns OFF after the M function is
completed.
OFF
OFF
OFF
ON
ON
0msec or more
IN_ABORT
OUT_MODE_EXE
ON
ON
OFF
OFF
OFF
0msec or more
IN_STOP
OUT_MODE_EXE