55/348
Siemens Building Technologies
Basic Documentation RVP540 / RVP550
CE1P2488en
HVAC Products
Description of the enduser settings
18.10.2002
3
Description of the enduser settings
For an overview of the settings and the setting procedure, refer to page 30
User interface
3.1 Heating circuit operating modes
•
Straightforward selection of heating circuit operating modes
The control provides 3 different heating circuit operating modes that can be directly se-
lected as required.
Select the required operating mode by pressing the respective operating mode button.
It is located on the controller front for direct access by the user.
Operating mode
Designation
Effect of selected operating mode
Automatic
operation
Heating according to the time program
(operating lines 5 to 11)
Room temperature setpoints according to the heating
program
Protective functions active
Operating actions on the room unit
possible
Automatic summer / winter changeover and automatic
24-hour heating limit active (ECO functions)
Continuous
operation
Heating mode with no time program
Room temperature adjustment with the setpoint knob
Protective functions active
Operating actions on the room unit
not
possible
Automatic summer / winter changeover and automatic
24-hour heating limit
in
active (ECO functions)
Standby Heating
OFF
Room temperature setpoint according to the frost
protection level
Protective functions active
Operating actions on the room unit
not
possible
Description
Settings
Effect
