62/348
Siemens Building Technologies
Basic Documentation RVP540 / RVP550
CE1P2488en
HVAC Products
Description of the enduser settings
18.10.2002
3.6 Info
button
•
Querying the current plant values
The Info button is used to query the current plant values (refer to Operating Instruc-
tions).
This enables the end-user to get an overview of the plant status.
Activation:
The Info display is activated by pressing the Info button.
It is accessible only when the cover of the controller is open
Deactivation:
•
By the timeout function after 8 minutes
•
By pressing one of the operating mode buttons
The Info values can be queried in all operating modes without the mode changing. The
standard display is the time of day.
Each time the Info button is pressed, the display jumps to the next Info value.
After the last Info value the display returns to the time of day.
The individual Info lines display the following values
(if there is no value, the display shows ---):
1
Outside temperature [°C]
2 Room
temperature
[°C]
3
Flow temperature [°C]
4
Boiler temperature oil- / gas-fired boiler [°C]
5
D.h.w. storage tank temperature at the top [°C]
6
D.h.w. storage tank temperature at the bottom [°C]
7
Temperature solar collector 1 [°C]
8
Temperature solar collector 2 [°C]
9
24-hour yield solar energy [kWh]
10
Total yield solar energy [kWh]
11
Buffer storage tank temperature at the top [°C]
12
Buffer storage tank temperature in the middle [°C]
13
Buffer storage tank temperature at the bottom [°C]
14
Boiler temperature of the wood-fired boiler [°C]
15
Return temperature wood-fired boiler [°C]
16
Flue gas temperature °C
17
Flow temperature heat pump [°C]
18
Return temperature heat pump
[°C]
19
Water / brine temperature heat pump [°C]
20
Swimming pool temperature °C
Example: display of the outside temperature (Info value 1):
0
4
8
12
16
20
24
1
2
3
4
5
6
7
8
9 10
23
92
Z
0
4d
Benefit
Description
Setting
Info
Effect
Display
