Philips IntelliVue Series, Installation And Service Manual

Page: 406 / 522

Troubleshooting
7-120
Maintenance, Troubleshooting, and Repair
Step 5. Verify that the proper software
version
is highlighted and press
Enter
.
When
Caution
appears on the screen with the message
If you continue, your Firmware
will be Reprogrammed
:
Step 6. Press
Enter
to program the device.
Note
Do not reboot or power cycle the device until the programming is complete.
When
Flash Programming Completed Successfully
appears on the screen with the
message
Reboot Now for the new System ROM to take effect
:
Step 7. Press
Enter
.
When the question
Do you want to reprogram another ROM
appears:
Step 8. Press the keyboard
Esc
key to Exit the program.
Step 9. Remove the
Recovery BIOS Floppy Disk
from the
A:
drive and place it in its
holder on the side of the Server the PC.
Step 10. Perform the
System Setup
procedure for the “ML370 G3 Database Server” on
page 7-122.
ML370 G2
Step 1. Insert the
Recovery BIOS Floppy Disk
into the
A:
drive of the Server.
Step 2. Properly shutdown and power cycle the Server to reboot it.
When Welcome to ROMPAQ appears on the screen:
Step 3. Press Enter to display the Select a Device window.
Step 4. Verify that Compaq Proliant ML370 G2 is highlighted in the List of
Upgradeable Devices and press Enter . The message Please Wait appears.
When Select an Image appears on the screen:
Step 5. Verify that the proper software version is highlighted and press Enter .
When Caution appears on the screen with the message If you continue, your Firmware
will be Reprogrammed :
Step 6. Press Enter to program the device.
Note Do not reboot or power cycle the device until the programming is complete.
When the question Do you want to reprogram another device appears:
Step 7. Press the keyboard Esc key to Exit the program.
Step 8. Remove the Recovery BIOS Floppy Disk from the A: drive and place it in its
holder on the side of the Server the PC.
Step 9. Perform the System Setup procedure for the “ML370 G2 Database Server” on
page 7-124.