Philips IntelliVue Series, Installation And Service Manual

Page: 26 / 522

Information Center System
1-2
Introducing the IntelliVue Information Center System
Information Center System
The Information Center system consists of medical software executing on a standard
workstation running a Windows Operating System.
Warning Components, topologies, and configurations specified by Philips have been optimized and
test to meet a variety of patient monitoring standards. Hardware and software products
not supplied by Philips as part of an Information Center system are not approved or
supported by Philips for use with Information Center and Clinical Network/Database
Server systems.
M3150
Information
Center Local
Database
Independent
Operation
The Information Center can operate as independent (stand-alone) central monitors. When
operating independently, patient data are stored in the Information Center PC.
Stored patient
monitoring data can only be reviewed on the Information Center on which it was obtained.
Real-time patient monitoring data, however, can be viewed by any Information Center
connected to the same CareNet switch, but not Information Centers on other CareNet
switches.
Standard
Components
Each M3150 Information Center includes the following standard components :
• Compaq D510 processing unit with:
– hard disk drive
– floppy disk drive
– CD ROM drive
– Windows XP Operating System software
– Information Center application software
– audio card
– SDN interface card
– 10BT/100TX Ethernet Network adapter card
• Keyboard
• Mouse
• External Speaker
• Uninterruptible Power Supply (UPS)
The current workstation for the Information Center is the Compaq D510 PC shown in Figure
1-2.
Note The specific workstation, display, UPS, and printer shipped with each system may vary with
date of purchase as newer models are substituted when they become available. Displays are