Philips IntelliVue Series, Installation And Service Manual

Page: 415 / 522

Troubleshooting
Maintenance, Troubleshooting, and Repair
7-129
Step 2. Press the keyboard
F10
key when
<F10 = Setup>
appears in the lower right of the
screen during the first few seconds of boot up when the word
COMPAQ
appears on
the screen. The
Language Menu
displays.
Language
Step 3.
Select
English
in the
Language Menu
and press
Enter
to display the
Setup
Utility
window.
File Menu
Step 4.
Select
File
in the upper row menu bar to display its menu.
Step 5.
Select
Set Defaults and Exit
in the
File Menu
and press
Enter
.
When the prompt
Are you sure ...
appears:
Step 6.
Press the keyboard
F10
key for
Yes
. The PC will then automatically reboot.
Step 7.
Repeat Steps 1 , 2 , and 3 to display the
File
menu again.
Step 8.
Select
Set Time and Date
in the
File
menu and press
Enter
to display the
Set Time and Date
window.
Step 9.
Set the
Time
and
Date
in the
File Menu
following the instructions given on
the screen.
When the prompt
Are you sure ...
appears:
Step 10.
Press the
F10
key to
Accept
. The system returns to the
Setup Utility
window.
Storage Menu
Step 11.
Select
Storage
in the upper row menu to display the
Storage
menu.
Step 12.
Select
Device Configuration
and press
Enter
to display its menu.
Step 13.
Select
Hard Disk
and
IDE Primary 0
and press
Enter
to display its menu.
Step 14.
Select
Default Values
and
IDE Defaults
and press
Enter
to display its
menu. Select
Translation Mode
, change its value to
LBA Assisted
using the
keyboard left or right arrow key, and press the
F10
key to
Accept
this change.
Step 15.
Press the
Esc
key to return to the
Setup Utility
window.
Security Menu
Step 16.
Select
Security
in the upper row menu to display the
Security
menu.
Step 17.
Select
Network Service Boot
and press
Enter
to display its menu.
Step 18.
Select
Network Service Boot
and change its value to
Disable.
Step 19.
Press
F10
to
Accept
these changes and return to the
Setup Utility
window.
Power Menu
Step 20.
Select
Power
in the upper row menu to display the
Power
menu.
Step 21.
Select
Energy Saver
and press
Enter
to display its menu.
Step 22.
Select
Energy Saver Mode
, change its value to
Disable
, and press
F10
to
Accept
this change.