Troubleshooting
7-130
Maintenance, Troubleshooting, and Repair
Advanced Menu
Step 23.
Select
Advanced
in the upper row menu to display the
Advanced
menu.
Step 24.
Select
Power On Options
and press
Enter
to display its menu.
Step 25.
Change the following
Power On Options
to the values indicated:
– POST Mode:
Full Boot
– POST Messages: Enable
– F12 Prompt:
Disable
Step 26.
Verify the following
Power On Options
is the value indicated:
– After Power Loss: On
Step 27.
Press
F10
to
Accept
these changes.
Step 28.
Select
Onboard Devices
and press
Enter
to display its menu.
Step 29.
Change the following
Onboard devices
item to the value indicated:
– Serial Port B:
2E8-2EF IRQ 3
(if no external modem)
– Serial Port B:
2F8-2FF IRQ 3
(with external modem)
Step 30.
Press
F10
to
Accept
this change.
Step 31.
Select
Device Options
and press
Enter
to display its menu.
Step 32.
Verify the following
Device Options
to the values indicated:
– Num Lock at Power-On: On
– PME Wakeup Events: Disable
– ACPI S3 Support:
Disable
– Integrated Audio:
Disable
Step 33.
Press
F10
to
Accept
these changes.
Reboot
Step 34.
Select
File
in the upper row menu to display its menu.
Step 35.
Select
Save Changes and Exit
and press
Enter
.
When the prompt
Are you sure ...
appears:
Step 36.
Press the
F10
key for
Yes
.
The system reboots and displays the system
Startup
window.
HP Vectra VL420
The PC BIOS is contained on the
Upgrade Floppy Disk
located in the holder on the side of
the PC. The procedure for updating the PC BIOS is as follows.
Step 1.
Insert the
“BIOS Update for HP Vectra VL420” disk
into the
A:\
drive of the PC.
Step 2.
Shutdown and Restart
the PC following proper shutdown procedure.
When the following screen appears:
“This program will flash your system with BIOS
version JA.01.04US”
Step 3.
Press the
Enter
key (or any key) to begin loading the BIOS ROM (see progress
indicator arrows - takes about a minute).
Summary of Contents for IntelliVue Series
