Philips IntelliVue Series, Installation And Service Manual

Page: 347 / 522

Troubleshooting
Maintenance, Troubleshooting, and Repair
7-61
RECORDER SELF TEST
initiates a self-test of the Recorder. The procedure is as
follows:
Step 1. Select the Recorder to be tested by clicking on its location in the rack --
Left
Recorder
,
Center Recorder
,
Right Recorder
.
Step 2. Click Start Test to initiate the self-test. The Recorder then begins its self-test. The
Recorder will print out codes that indicate its operational status. Explanations of these
codes can be found in the
Recorder Service Manual .
Stop Test stops the print test before it has completed.
Recorder Test Status provides messages that assist the procedure and indicate the
status of the self-test and the Recorder’s condition.
SDN CARD initiates a self-test of the SDN Card in the Information Center or Client PC
and its branch connections. The procedure is as follows:
Step 1. Click Start Test to initiate the self-tests.
Stop Test
stops the SDN card tests before they have completed.
a
%
complete field indicates the progress of the test.
If the SDN Card self-tests pass, the message
SDN Card Testing PASSED
appears. Click
OK
to continue.
If there is an SDN card self-test failure, the message
SDN Card Failure
appears.