Troubleshooting
7-144
Maintenance, Troubleshooting, and Repair
c. Select (highlight) one of the
RAID disks
in the
CHANNEL-0
window, verify
that its state is
Ready
, and press the keyboard
Spacebar
.
d. Repeat verification of the
Ready
state for each of the RAID disks.
e. Repeat the process to verify that all RAID disks are
ONLIN
.
f. Press the keyboard
F10
key to start the configuration process.
g. Select
RAID
in the
Logical Drive 0
window and
Enter
.
h. Select
RAID level 5
and
Enter
.
i. Select
Accept
in the
Logical Drive 0
window and
Enter
to accept the new
settings
j. Select
Accept
in the
Logical Drive 1
window and
Enter
to accept the new
settings.
k. Select
YES
in answer to
Save Configuration?
and
Enter
to save the settings.
l. Press
Enter
m. Press the keyboard
Esc
key until the
Management Menu
reappears.
Step 5. Verify the Write Policy settings
as follows:
a. Select
Objects
in the
Management Menu
and
Enter
.
b. Select
Logical Drive
and
Enter
.
c. Select
Properties
and
Enter
.
d. Select
Write Policy
and
Enter
.
e. Select
WRBACK
and
Enter
.
f. Press the keyboard
Esc
key until the
Object Menu
appears.
Step 6. Verify the SCSI Transfer Rate settings
as follows:
a. Select
SCSI Channel
in the
Object Menu
and
Enter
.
b. Select
Channel 0
and
Enter
.
c. Select
SCSI Transfer Rate
and
Enter
.
d. Select
ULTRA-2
and
Enter
.
e. Select
YES
and
Enter
.
f. Press the keyboard
Esc
key until the
Management Menu
appears.
Step 7. Verify disk settings
as follows:
a. Select
Initialize
in the
Management Menu
and
Enter
.
b. Select
Logical Drive 0
and press the keyboard
Spacebar
.
c. Press the keyboard
F10
key to start the initialization.
d. Select
YES
in answer to
Initialize Drive?
and
Enter
.
e. Press
any keyboard key
when the prompt appears at the bottom of the screen.
Step 8.
Press the keyboard
Esc
key to return to the
Management Menu
.
Step 9.
Press the
Esc
key again.
Step 10.
Select
YES
in answer to
Exit?
and
Enter
.
Step 11. Reinstall Windows Operating System and Philips Application software
following procedures provided in this chapter.
Recreating FIST
Bootable Floppy
Disk
If the
FIST
bootable floppy disk is lost or damaged, it can be recreated at any Information
Center, Client, or the Server from the Philips software CD ROM.
Summary of Contents for IntelliVue Series
