Philips IntelliVue Series, Installation And Service Manual

Page: 503 / 522

Procedure
Data Export - Installation on the Database Server
E-3
Step 8. Reattach the left side panel and front bezel .
Step 9. Reinsert the Database Server power cord into its AC receptacle.
Figure E-1 Slot Placement for Cards
Note All Philips Patient Monitoring products that operate in a LAN environment undergo industry-
standard virus checking as part of the product manufacturing process. If installed as specified,
the Information Center will not introduce a virus onto the hospital LAN. In order to allow the
level of access desired by users while ensuring viruses do not affect the operation of the
Information Center product, it is imperative that hospitals are vigilant in maintaining a virus-
free intranet. This is the responsibility of the hospital, not Philips Medical Systems.
Entering the
NIC IP
Address
The following procedure describes how to enter the IP Address for the NIC. The IP Address
should be provided by the hospital’s IT department and be compatible with the hospital’s
intranet.
Step 1. Open Network and Dial-Up Connections by one of the following paths:
6
5
4
3
2
1
Keyboard Connector
Mouse Connector
Display Connector
Parallel Connector
LAN Connector
Serial Connector A
Serial Connector B
Power Cord Connector
Second LAN Card
(Optional)