Philips IntelliVue Series, Installation And Service Manual

Page: 283 / 522

Configuration
Software Installation & Configuration
6-57
When
Date and Time Setup
is opened directly from the
Configuration
menu,
Store
Settings
must be clicked for the settings to be stored.
Procedure
The procedure for setting time and date in the
Time and Date Setup
window is the
following:
Step 1. Set date and time to present values by clicking in the boxes of the
Date:
and
Time:
fields and using up/down arrows to change the values.
Step 2. Set the time zone of the Information Center location in the Time Zone field by
clicking the pull down button on the right of the field and then clicking on the
appropriate
Time Zone .
Step 3. If the Information Center location uses daylight savings time:
• Click in the Automatically Adjust For Daylight Savings Time box. Time will
then change automatically to the correct value when daylight savings time changes.
Step 4. If
Date and Time Setup
was activated directly from the
Configuration
menu:
• Click on Store Settings . A Time Set App box will appear asking
Are you sure? Please Confirm .
• Double check your settings. When they are correct,
• Click Yes and the date and time will be set on the Information Center and all other
devices on the network.
If
Date and Time Setup
was activated from
Config. Wizard
,
• Click Next> to advance to the !Config Wizard Print All window.
Note
For Information Centers without a Database Server, the next window is
Archive
.