Lantronix x6010, User Manual

Page: 96 / 261

Lantronix ION x6010 User Guide
33493 Rev. F https://www.lantronix.com/ Page 96 of 261
D. Upgrade the IONMM / NID Firmware
Perform this procedure to upgrade the IONMM / NID Firmware from either
• the IONMM
MAIN
tab (step D1) or
• the
UPGRADE
tab (step D2).
D1
. Upgrade IONMM / NID Firmware from the
MAIN
Tab.
1. Access the IONMM card through the Web interface (see “Starting the Web Interface”).
2. Select the
MAIN
tab.
3. Locate the
TFTP Settings
section at the bottom of the screen.
4. Enter the
TFTP Server Address.
This is the IP address of the TFTP Server from step C (“Run TFTP
Server”) above.
5. Enter the
Firmware File Name
. This is the name of the firmware file from step C sub-step 2
above.
6. Click the
Upgrade Firmware
button.
The message “ The specified firmware on the TFTP Server will be upgraded to the current module;
are you sure to proceed? ” displays.
7. Click
OK
.
The file is downloaded and the x6010 and/or IONMM reboots. When the reboot is complete,
the message “ [xx]IONMM rebooting finished ” displays.
8. Click the
Refresh
button. The
Software Revision
area is updated from the old version number to
the new version number (e.g., from 1.0.3 to 1.0.5).
9. If you will be using the same TFTP Server Address for future upgrades, click the
Save Server
Address
button.